Flash column chromatography equilibration speed – how fast can you go?

Equilibrating silica flash chromatography columns is something I always do.  There are chemists who see this as an unnecessary, time-and-solvent-wasting step.  Because getting consistent, predictable results is a priority, I equilibrate to remove the variability that can be caused by heat generated as solvent initially contacts the silica. Consistency is really important when running flash column chromatography because re-runs are time consuming and may put your compound at risk.

In this post, I examine the role of equilibration speed and duration to show its impact, or lack there of, on purification performance.
Continue reading Flash column chromatography equilibration speed – how fast can you go?

How does solvent choice impact reversed-phase flash chromatography separations?

I have recently posted on how solvent choice influences the separation of hard to resolve compounds using normal-phase flash chromatography. As a chemist with an inquiring mind, I thought I would expand my research beyond normal-phase and see what happens in reversed-phase.

In this post, I share my results. 

Continue reading How does solvent choice impact reversed-phase flash chromatography separations?

How can I modify my flash chromatography method to separate chemically similar compounds?

The challenges organic, medicinal, and natural product chemists face are many: from designing reactions, to optimizing synthesis, work-up / extraction, and purification / isolation of the desired compound or compounds. Among those issues related to purification / isolation is the common problem of separating compounds with similar chemistry that either co-elute or separate poorly.

In this post I will discuss some tips on how to “resolve” this issue (yes, pun intended).

Continue reading How can I modify my flash chromatography method to separate chemically similar compounds?

How do I purify ionizable organic amine compounds using flash column chromatography?

For most organic reaction mixture purifications the process is fairly straightforward. Use hexane/ethyl acetate or, for polar compounds, DCM/MeOH.  But what do you do if this doesn’t work and your compounds are basic organic amines?

In this post, I re-examine the options available to achieve an acceptable organic amine purification when typical separation methods are insufficient. Continue reading How do I purify ionizable organic amine compounds using flash column chromatography?

What do I do if a 2-solvent gradient will not separate my sample?

Usually, a 2-solvent or binary gradient will separate your desired compound from the by-products and impurities. Sometimes though, you can encounter a mixture in which some compounds co-elute and are not separable with any binary gradient you try.

I encountered this situation recently while trying to purify a lavender essential oil and have dedicated this post to how I solved the problem.  Continue reading What do I do if a 2-solvent gradient will not separate my sample?

When should I add acid to my detector make-up solvent when using mass-directed flash chromatography?

Increasingly, organic and medicinal chemistry labs use mass-directed flash chromatography to isolate synthesized compounds. Mass-directed flash chromatography benefits are many, including collecting only the targeted molecule(s) in the reaction mixture. This approach simplifies compound purification since you know what you have made and it’s associated mass.

However, there are mass detection nuances that can be challenging. One of these is to know when an acid should be added to the mass detector’s make-up solvent to protonate targeted molecules. In this post, I will provide some insight on this topic.

Continue reading When should I add acid to my detector make-up solvent when using mass-directed flash chromatography?

How do I remove an annoying MS TIC background?

Have you ever run flash column chromatography with mass detection (Flash-MS) and observed the total ion current or TIC increase during the purification only to find that there was no discernible compound contributing to the effect?

In this post I discuss how I came across this issue and the solution I found to work.

Continue reading How do I remove an annoying MS TIC background?